How to choose the material of the customized paper bag?

Publish Time: Author: Site Editor Visit: 472

With the country's attention to environmental protection, paper bags are particularly important in people's life. At the same time, many enterprises will choose customized paper bags to package their products in order to promote their own brand and product image. Of course, any product will have a grade, paper bag material is no exception.

First of all, white cardboard is the most common one, because its texture is firm. The thickness of 210g can bear 3-5kg. If it is a heavier object, the thickness of 250g can be higher, and the printing effect is good, the price is moderate, and it is also the choice of medium and high-grade products. Copperplate paper is generally not a very commonly used material, its quality is softer than white cardboard, the normal thickness is generally 175g, the printing effect is the same as white cardboard, it also needs to be coated, and the price is basically the same as white cardboard.

In recent years, foreign brand clothing bags are also starting to use 180g white card paper, which is also imported from abroad. This paper bag is light and not particularly large, because its load-bearing is less than white card paper, and the advantage is that the printing does not change color and does not need to be covered with film. At the same time, its price is the most expensive of all materials, and gift bag manufacturers will use this material. Of course, there are also Kraft materials, its price is cheaper than the copper plate paper below, but the printing effect is not very good, of course, the imported effect is better than the domestic one.

However, these all depend on the output value of the product. If the output value is not high, you can choose cheap packaging. For example, grey board paper and double-sided white material are the cheapest of paper. Gray board paper refers to the paper with white on both sides and gray on one side, with a minimum thickness of 250g, which is soft in hardness, similar in printing effect to white card paper and also needs to be covered with film. The double-sided white paper is similar to the gray board paper. Its two sides are white and the middle is gray, but the price is more expensive than the gray board paper.

The above is an introduction to the selection of materials for customized paper bags. When selecting the materials for customized paper bags, we must consider the matching with the products. We must not choose cheap materials too frugally. We must confirm the samples with the manufacturers and pay attention to the effect of matching with the products to avoid unnecessary troubles.

Next The problem of customized height of garment paper bags is also difficult
24 volt gear motor stepper gear motor micro brushless motor small dc gearmotors